This is module to write RINEX observation files.
| Parameter | Description | Unit | Default / Related Values | Notes | |
|---|---|---|---|---|---|
| Agency | Name of observing agency (20 characters usable). | - | |||
| AntennaNumber | Antenna number (20 characters usable). | - | |||
| AntennaOffsetE | Antenna offset East. | m | |||
| AntennaOffsetH | Antenna offset Height. | m | |||
| AntennaOffsetN | Antenna offset North. | m | |||
| AntennaType | Antenna type (20 characters usable). | - | |||
| ApplyMeasuredClockErrorToMeasurements | Determines if the measurement epochs are adjusted by the SPP estimated receiver clock error before writing to the RINEX file (the receiver time then is also adjusted by the measured clock error). This produces RINEX records, whose nominal times coincide with the true GPS times. Works only if a position fix can be obtained. | - | |||
| Approx_X_CoordinateMarkerWGS84 | Approximate WGS84 X-Coordinate of the marker (see ValidApproxMarkerPosition). | m | |||
| Approx_Y_CoordinateMarkerWGS84 | Approximate WGS84 Y-Coordinate of the marker (see ValidApproxMarkerPosition). | m | |||
| Approx_Z_CoordinateMarkerWGS84 | Approximate WGS84 Z-Coordinate of the marker (see ValidApproxMarkerPosition). | m | |||
| FileName | Path to and name of the RINEX file. Filename can be generated using substitutes. | - | Explanation: put a '#' as the first character of this string to enable substitute usage. Then _YYYY_ will be replaced for year 4 digits, _DDD_ for day, _YY_ for year 2 digits and _R_ for revision number e.g.: 'o:\_YYYY_\_DDD_\GPS__DDD__R_._yy_o' | ||
| GenerateRINEX_Output | Set to true to generate RINEX output files. | - | |||
| Interval | RINEX output interval, a value of 0.0 results in output of all valid epochs. | s | |||
| MarkerName | Name of RINEX marker (4 characters usable). | - | |||
| MarkerNumber | Number of RINEX marker (20 characters usable). | - | |||
| Observer | Name of observer (40 characters usable). | - | |||
| OutputOnlyWhenValidClockErrorDifference | If true, then RINEX data is only generated, when the receiver was able to estimate the receiver clock error. | - | Note: set OutputOnlyWhenValidClockErrorDifference and OutputOnlyWhenValidReceiverPosition to false to output all data. | ||
| OutputOnlyWhenValidReceiverPosition | If true, then a RINEX record is only generated when the receiver was able to compute a position fix. | - | Note: set OutputOnlyWhenValidClockErrorDifference and OutputOnlyWhenValidReceiverPosition to false to output all data. | ||
| RINEX_OutputDataCarrierPhase | Set true to output carrier phase measurements. | - | |||
| RINEX_OutputDataCodePhase | Set true to output code phase measurements. (not standard compliant) | - | Note: this is a non-standard(!) RINEX extension, identified with character H within RINEX file. | ||
| RINEX_OutputDataDoppler | Set true to output Doppler frequency. | - | |||
| RINEX_OutputDataPseudoRange | Set true to output code pseudorange measurements. | - | |||
| RINEX_OutputDataSignalStrength | Set true to output the ratio of the carrier power to the noise spectral density (C/N0). | - | |||
| RINEX_OutputTimeDifferencetoEpoch | Set true to output the difference in time of first observable in that epoch in regards to epoch | ns | |||
| RINEX_OutputFormat3 | Select RINEX output format, 0 = format 2.11, 1 = format 3.00. | - | |||
| RINEX_OutputGPS_L1C/A | If true observations from GPS satellites on L1 C/A are stored within the RINEX file. | - | Service Id = 1 | ||
| RINEX_OutputGPS_L2C(M+L) | If true observations from GPS satellites on L2C are stored within the RINEX file. | - | Service Id = 2 | ||
| RINEX_OutputGPS_L2P(Y) | If true observations from GPS satellites on L2P(Y) obtained via cross-correlation are stored within the RINEX file." | - | Service Id = 3 | ||
| RINEX_OutputGPS_L5IQ | If true observations from GPS satellites on L5 are stored within the RINEX file. | - | Service Id = 4 | ||
| RINEX_OutputGlonass_L1 | If true observations from GLONASS L1C/A are stored within the RINEX file. | - | Service Id = 8 | ||
| RINEX_OutputGlonass_L2 | If true observations from GLONASS L2C/A are stored within the RINEX file. | - | Service Id = 9 | ||
| RINEX_OutputGalileo_E5aIQ | If true observations from Galileo satellites on E5a are stored within the RINEX file. | - | Service Id = 6 | ||
| RINEX_OutputGalileo_E5ab | If true observations from Galileo satellites on E5ab (AltBOC) are stored within the RINEX file. | - | Service Id = 14 | ||
| RINEX_OutputGalileo_E5b | If true observations from Galileo satellites on E5b are stored within the RINEX file. | - | Service Id = 13 | ||
| RINEX_OutputGalileo_E6 | If true observations from Galileo satellites on E6 are stored within the RINEX file. | - | Service Id = 15 | ||
| RINEX_OutputGalileo_L1(B+C) | If true observations from Galileo satellites on E1 are stored within the RINEX file. | - | Service Id = 5 | Note: in the beginning of Galileo E1 was denoted as L1. This explains this odd name for this entry. | |
| RINEXOutputBeidou_B1C | If true observations from Beidou B1C are stored within the RINEX file. | - | Service Id = 35 | ||
| RINEXOutputBeidou_B1 | If true observations from Beidou satellites on B1 are stored within the RINEX file. | - | Service Id = 26 | ||
| RINEXOutputBeidou_B2 | If true observations from Beidou satellites on B2 are stored within the RINEX file. | - | Service Id = 27 | ||
| RINEXOutputBeidou_B3 | If true observations from Beidou satellites on B3 are stored within the RINEX file. | - | Service Id = 28 | ||
| RINEX_OutputSBAS_L1C/A | If true observations from SBAS satellites (e.g. EGNOS) on L1 are stored within the RINEX file. | - | Service Id = 7 | ||
| RINEXOutputLTE_PCI | If true then observations from processing communications signals (LTE, 5G, etc.) are written into the RINEX file | - | Service Id = 36 | Special 3-digit satelite ids are used to identify the transmitters within the RINEX OBS file | |
| RINEX_OutputStarlink_C1 | If true observations from Starlink satellites on Channel 1 are stored within the RINEX file. | - | Service Id = 47 (Centerfreq 10.8251171875 GHz) | ||
| RINEX_OutputStarlink_C2 | If true observations from Starlink satellites on Channel 2 are stored within the RINEX file. | - | Service Id = 48 (Centerfreq 11.0751171875 GHz) | ||
| RINEX_OutputStarlink_C3 | If true observations from Starlink satellites on Channel 3 are stored within the RINEX file. | - | Service Id = 37 (Centerfreq 11.3251171875 GHz) | ||
| RINEX_OutputStarlink_C4 | If true observations from Starlink satellites on Channel 4 are stored within the RINEX file. | - | Service Id = 38 (Centerfreq 11.5751171875 GHz) | ||
| RINEX_OutputStarlink_C5 | If true observations from Starlink satellites on Channel 5 are stored within the RINEX file. | - | Service Id = 49 (Centerfreq 11.8251171875 GHz) | ||
| RINEX_OutputStarlink_C6 | If true observations from Starlink satellites on Channel 6 are stored within the RINEX file. | - | Service Id = 50 (Centerfreq 12.0751171875 GHz) | ||
| RINEX_OutputStarlink_C7 | If true observations from Starlink satellites on Channel 7 are stored within the RINEX file. | - | Service Id = 51 (Centerfreq 12.3251171875 GHz) | ||
| RINEX_OutputStarlink_C8 | If true observations from Starlink satellites on Channel 8 are stored within the RINEX file. | - | Service Id = 52 (Centerfreq 12.5751171875 GHz) | ||
| RINEX_OutputIRNSS_L1 | If true observations from IRNSS satellites on L1 are stored within the RINEX file. | - | |||
| RINEX_OutputIRNSS_L5 | If true observations from IRNSS satellites on L5 are stored within the RINEX file. | - | |||
| RINEX_OutputQRZSS_L1C | If true observations from QZSS satellites on L1C are stored within the RINEX file. | - | |||
| RINEX_OutputIridium_RingAlert | If true observations from Iridium satellites of Simplex Channel 7 are stored within the RINEX file. (Ring Alert) | - | |||
| RINEX_OutputXona_L5 | If true observations from Xona satellites on L5 are stored within the RINEX file. | - | |||
| RINEX_Output5G_NTN | If true observations from 5G satellites off the NTN are stored within the RINEX file. | - | |||
| RINEX_Output5G_TN | If true observations from 5G stations off the TN are stored within the RINEX file. | - | |||
| RINEX_OutputIris2 | If true observations from Iris² satellites are stored within the RINEX file. | - | |||
| ReceiverNumber | Receiver number (20 characters usable). | - | |||
| ReceiverType | Receiver type (20 characters usable). | - | |||
| ValidApproxMarkerPosition | Determines if a known approximate marker position is written into the RINEX header or the a value determined by SPP (if available) | - | |||